POST SMTP Test

The POST /SMTPClosed Short for simple mail transfer protocol, SMTP is a protocol for sending email messages between servers./Test method is used to test the SMTP settings by sending a test email message. This method returns HTTP 200 OK on a success with details about the SMTP profile.

Tip:  The following permissions (see Security Roles and Claims) are required to use this feature:

/system_setting/modify/

Table 808: POST SMTP Test Input Parameters

Name In Description
Host Body Required. A string indicating the fully qualified domain name of your SMTP host (e.g. corpexch02.keyexample.com).
Id Body An integer indicating the Keyfactor Command reference ID of the SMTP record. This will be 1 in most environments.
Port Body Required. An integer indicating the SMTP port (e.g. 25).
RelayAuthenticationType Body

An integer indicating the type of authentication used to connect to the mail server. The default is 0 (zero).

RelayPassword Body

Required*. An object indicating the password information to use for authentication along with the RelayUsername if the RelayAuthenticationType is 2 (Explicit Credentials).

This value is Required if RelayAuthenticationType is 2.

Supported methods to store secret information are:

  • Store the secret in the Keyfactor secrets table.

    A Keyfactor secret is a user-defined username or password that is encrypted and stored securely in the Keyfactor Command database.

  • Load the secret from a Keyfactor Command local or supported third-party PAM solution.

    See Privileged Access Management (PAM) and PAM Providers for more information.

For example, the password stored as a Keyfactor secret will look like:

Copy 
 {
   "SecretValue": "MySuperSecretPassword"
}

The password stored as a local Keyfactor Command PAM secret will look like (where the Provider value—1 in this example—is the Id value from GET PAM Providers and the SecretName is the name defined for the secret):

Copy 
{
   "Provider": "1",
   "Parameters":{
      "SecretName":"EmailSenderPassword"
   }
}

The password stored as a CyberArk PAM secret will look like (where the Provider value—2 in this example—is the Id value from GET PAM Providers and the Folder and Object reference the folder name and object name in the CyberArk safe):

Copy 
{
   "Provider": "2",
   "Parameters":{
      "Folder":"MyFolderName",
      "Object":"MyEmailUserPassword"
   }
}

The password stored as a Delinea PAM secret will look like (where the Provider value—3 in this example—is the Id value from GET PAM Providers and the SecretId is the ID if the secret created in the Delinea secret server for this purpose):

Copy 
{
   "Provider": "3",
   "Parameters":{
      "SecretId":"MyEmailUserPasswordId"
   }
}

Due to its sensitive nature, this value is not returned in responses.
RelayUsername Body

Required*. An object indicating the username information to use for authentication along with the RelayPassword if the RelayAuthenticationType is 2 (Explicit Credentials).

This value is Required if RelayAuthenticationType is 2.

Supported methods to store secret information are:

  • Store the secret in the Keyfactor secrets table.

    A Keyfactor secret is a user-defined username or password that is encrypted and stored securely in the Keyfactor Command database.

  • Load the secret from a Keyfactor Command local or supported third-party PAM solution.

    See Privileged Access Management (PAM) and PAM Providers for more information.

For example, the password stored as a Keyfactor secret will look like:

Copy 
 {
   "SecretValue": "MySuperSecretPassword"
}

The password stored as a local Keyfactor Command PAM secret will look like (where the Provider value—1 in this example—is the Id value from GET PAM Providers and the SecretName is the name defined for the secret):

Copy 
{
   "Provider": "1",
   "Parameters":{
      "SecretName":"EmailSenderPassword"
   }
}

The password stored as a CyberArk PAM secret will look like (where the Provider value—2 in this example—is the Id value from GET PAM Providers and the Folder and Object reference the folder name and object name in the CyberArk safe):

Copy 
{
   "Provider": "2",
   "Parameters":{
      "Folder":"MyFolderName",
      "Object":"MyEmailUserPassword"
   }
}

The password stored as a Delinea PAM secret will look like (where the Provider value—3 in this example—is the Id value from GET PAM Providers and the SecretId is the ID if the secret created in the Delinea secret server for this purpose):

Copy 
{
   "Provider": "3",
   "Parameters":{
      "SecretId":"MyEmailUserPasswordId"
   }
}
SenderAccount Body

Required. A string indicating the sender for email messages delivered from Keyfactor Command, in the form of an email address (e.g. jsmith@keyexample.com). Depending on the email configuration in your environment, the sender account may need to be a valid user on your mail server or you may be able to put anything in this field.
SenderName Body

Required. A string indicating the name that appears as the “from” in the user's mail client (e.g. Keyfactor Command). This value is used for both configurations of RelayAuthenticationType.
TestRecipient Body Required. A string indicating the recipient name, in email format (e.g. mjones@keyexample.com), for a test message to be sent using the SMTP configuration to confirm functionality.
UseSSL Body A Boolean indicating that mail should be delivered over TLS/SSL. Not all mail servers support this.

Table 809: POST SMTP Test Response Data

Name Description
Host A string indicating the fully qualified domain name of your SMTP host (e.g. corpexch02.keyexample.com).
Id An integer indicating the Keyfactor Command reference ID of the SMTP record. This will be 1 in most environments.
Port An integer indicating the SMTP port (e.g. 25).
RelayAuthenticationType

An integer indicating the type of authentication used to connect to the mail server. The default is 0 (zero). ClosedShow authentication details.
RelayUsername

An object indicating the username information to use for authentication along with the RelayPassword if the RelayAuthenticationType is 2 (Explicit Credentials).
SenderAccount

A string indicating the sender for email messages delivered from Keyfactor Command, in the form of an email address (e.g. jsmith@keyexample.com). Depending on the email configuration in your environment, the sender account may need to be a valid user on your mail server or you may be able to put anything in this field.
SenderName

A string indicating the name that appears as the “from” in the user's mail client (e.g. Keyfactor Command). This value is used for both configurations of RelayAuthenticationType.
TestRecipient A string indicating the recipient name, in email format (e.g. mjones@keyexample.com), for a test message to be sent using the SMTP configuration to confirm functionality.
UseSSL A Boolean indicating that mail should be delivered over TLS/SSL. Not all mail servers support this.
Tip:  See the Keyfactor API Reference and Utility which provides a utility through which the Keyfactor APIClosed An API is a set of functions to allow creation of applications. Keyfactor offers the Keyfactor API, which allows third-party software to integrate with the advanced certificate enrollment and management features of Keyfactor Command. endpoints can be called and results returned. It is intended to be used primarily for validation, testing and workflowClosed A workflow is a series of steps necessary to complete a process. In Keyfactor Command, it refers to the workflow builder, which allows you to automate event-driven tasks such as when a certificate is requested, revoked or found in a certificate store. development. It also serves secondarily as documentation for the API. The link to the Keyfactor API Reference and Utility is in the dropdown from the help icon () at the top of the Management Portal page next to the Log Out button.